Ericsson 7700 User Manual

You can use roll paper with a 2- or 3-inch core and a width of up to 
24 inches (61 cm) for the Pro 7700, or 44 inches (112 cm) for the Pro 9700. 
Manually switching rolls is a simple process. 

When printing on roll paper, be sure to follow the media handling 
guidelines on page 58, as well as these special guidelines for roll paper:

•

When storing roll paper, keep it in its original packaging—including the 
bag, end caps, and box.

•

To avoid feeding excess paper, make sure the 

Sheet icon does not 

appear on the LCD display. Press the l Paper Source button until the 

 

or 

 roll icon

 

appears.

•

Choose 

 

if you want the paper to be cut automatically after each 

page is printed. 

•

Choose 

 

if you want to print a series of pages and keep them together 

for cutting later on or use the Auto Take-up Reel (Pro 9700 only).

•

If you’re loading heavy paper, you may need to increase the paper 
suction by pressing the u Paper Feed button. For lightweight paper, 
decrease the suction by pressing the d Paper Feed button. 

•

Do not leave roll paper loaded in the printer when it is not in use.

Whenever you load a new type of paper, you need to select the paper type on 
the printer’s control panel.

1. Press r 

Menu

.

2. Press u or d to select 

PAPER SETUP

, then press r.

3. Select 

PAPER TYPE

, then press r.

4. Select the paper that you are using as listed on page 60, then press the 

OK

 button to save the setting.

5. Press 

 to exit the menu.