Edimax Technology PS-1206UWg User Manual

 

55 

Lines should be indented with tabs. 

Where hostname is the device name of a print server, the 
ht=1 tag specifies the hardware type is Ethernet, the ha= 
tag specifies the Ethernet address of a print server, which 
is the Node ID located on the print server. The ha tag 
must be preceded by the ht tag. The ip= tag should 
correspond to the IP address you want to assign to the 
print server. 

For example, a print server with the following 
configuration: 

The entry for this print server in the /etc/bootptab file 
should be: