Panasonic KX-MB772CX User Manual

Page of 88
5. Copier
32
5.1.2 Using the auto document feeder (KX-
MB772 only)
1
If the {COPY} light is OFF, turn it ON by pressing 
{
COPY}.
2
Set the original (page 19).
3
If necessary, change the resolution and contrast 
according to the type of document.
L
To select the resolution, see page 31.
L
To select the contrast, see page 31.
4
If necessary, enter the number of copies (up to 99).
5
{
START}
L
The unit will start copying.
6
After you finish copying, press {STOP} to reset the 
settings you set in step 3 and 4.
Note:
L
To stop copying, see page 64.
5.2 More copying features
L
Make sure that the {COPY} light is ON.
5.2.1 To enlarge/reduce a document
1
Set the original (page 19).
2
Press {ZOOM} repeatedly to select the enlargement 
/ reduction rate that fits the size of your document 
and recording paper.
ZOOM  =100%”
50%”
200%”
97%(LTR>A4)”
94%(A4>LTR)”
83%(LGL>A4)”
78%(LGL>LTR)”
L
If you select 
ZOOM  =100%”, press {V} or {^} 
repeatedly to change the enlargement / 
reduction rate by 1% at a time from 
25%” to 
400%”.
You can also enter the desired percentage 
specifically by using the dial keys.
3
{
SET}
4
If necessary, enter the number of copies (up to 99). 
i {START}
5
After you finish copying, press {STOP} to reset this 
feature.
Note:
L
Enlargement / reduction copy is not available for 
quick ID copy feature (page 33), poster feature (page 
34
) or N in 1 feature (page 34).
L
You can hold the previous zoom (enlargement / 
reduction) setting (feature #468 on page 61).
L
When using the scanner glass, the unit will only 
enlarge the right top corner of the document starting 
from the m mark on the unit.
L
When using the auto document feeder, the unit 
will only enlarge the centre of the upper part of the 
document. To make an enlarged copy of the bottom 
of the document, turn the document around, and 
then make a copy (KX-MB772 only).
L
You cannot reduce the whole area of a legal size 
document (KX-MB262 only).
{
COPY}
{
STOP}
{
START}