Epson PRO 3800 User Manual

Page of 18
Epson Stylus Pro 3800
12/06
Epson Stylus Pro 3800 - 15
5. Carefully pull the cartridge straight out of the slot and 
dispose of it properly.
Warning: Do not shake the expended cartridge, or ink may 
leak out. If ink gets on your hands, wash them thoroughly with 
soap and water. If ink gets in your eyes, flush them 
immediately with water.
6. Make sure the replacement ink cartridge is the correct color, 
and then remove it from its package. 
7. Shake the ink cartridge well before installing it.
8. Hold the ink cartridge with the arrow mark facing up and 
pointing to the back of the printer, and then insert it into 
the slot until it clicks.
The printer has a protection system to prevent improper 
cartridge insertion. If you cannot insert the ink cartridge 
easily or if you see the message 
INK CARTRIDGE ERROR
 
on the LCD panel, the type of cartridge may be incorrect. 
Check the package and product code.
If the B ink light remains on, the ink cartridge may not be 
installed correctly. Remove the ink cartridge and then 
reinsert it as described above.
9. Close the ink cover and press it until it clicks. 
When you see 
READY
 on the LCD, the printer is ready to 
print. 
Replacing the Maintenance Cartridge
The maintenance cartridge stores ink that gets flushed from 
the system during print head cleaning. When the cartridge is 
almost full, the message 
MAINTENANCE CARTRIDGE IS 
NEARLY FULL
 appears on the LCD panel. When the 
cartridge is completely full, the printer stops working and 
REPLACE THE CARTRIDGE
 appears on the LCD. 
You can check how much space remains in the maintenance 
cartridge by viewing its indicator on the control panel, as 
shown below. You can also check its status using the printer’s 
menus (see page 11) or by printing a nozzle check sheet 
(see page 12). 
Replacement cartridges are available from Epson (product 
code T582000). 
Arrow mark
Maintenance 
cartridge indicator 
(showing a new 
cartridge)