Epson DFX-5000+ User Manual
9.
Slide the sprocket units so that the paper is straight and smooth,
and then lock them into place.
and then lock them into place.
Caution:
Be sure the sprocket units are not too far a part. If they pull
your paper
too tightly or tear the edges
of
the paper holes, a
paper jam may result. To remove any excess tension in your
paper, release the right sprocket unit and lock if again.
10. Adjust the top-of-form position as described in Chapter 2, if
necessary.
11. Close the top cover. Press the LF/FF button to feed the paper
out the back of the printer. Make sure the edge of the first
sheet emerges below the paper separator.
sheet emerges below the paper separator.
Using the pull tractor with the rear tractor
If you are using labels or multi-part forms with more than four
parts (including the original), do not use the rear tractor; use the
front tractor as described in the previous section.
parts (including the original), do not use the rear tractor; use the
front tractor as described in the previous section.
Using the Printer Options
4-9