Epson DFX-5000+ User Manual

3. Press the FRONT/REAR button to switch to the rear tractor.

The front-loaded paper automatically feeds back to the

standby position and the rear-loaded paper advances to the

top-of-form position.

Changing the Paper

The following steps describe the procedure for changing paper

on the front tractor, but you can follow the same steps when

you change the paper on the rear tractor.

Before you start, make sure the printer is turned on and the

front tractor is selected. (If you are changing the paper on the

rear tractor, the rear tractor should be selected instead.)

Caution:

Never change paper using the following procedure if labels are

already loaded in the printer. Instead, completely remove the

labels first by tearing off the fresh supply below the tractor and

pressing LF/FF to eject the remaining labels. Then load the new

paper as described earlier in this chapter.

Loading and Using Paper

2-21