Epson DFX-5000+ User Manual
Note:
The paper memory feature is available only with the front tractor.
Caution:
When using overlapping multi-part forms, do not press the
TEAR OFF, FRONT/REAR, TOP OF FORM or
reverse-feeding (bottom) MICRO FEED button or a
paper jam
may result. To remove these forms, tear off the fresh supply at a
perforation below front tractor and press the LF/FF button
to eject the remainingforms.
Saving paper memory settings
This procedure requires setting several DIP switches. See the
section on changing DIP-switch settings earlier in this chapter.
1.
2.
3.
4.
Make sure the printer is turned off.
Turn DIP switch 3-4 off to save your settings for memory
number 1 or on for memory number 2.
Select the page length by turning DIP switches 3-1 and 3-2
on or off as shown below.
Page length
SW 3-1
SW 3-2
11 inches
OFF
OFF
12 inches
OFF
ON
8.5 inches
ON
OFF
70/6 inches
ON
ON
Select the paper type by turning DIP switches 3-5 and 3-6 on
or off as shown below.
3-20
Using the Printer