Epson DFX-9000 User Manual
106
Problem Solver
O
= on,
F
= flashing
••• = short series of beeps (three beeps), ••••• = long series of beeps (five beeps)
Note:
The printer beeps once if you press a control panel button when the
corresponding function is not available.
The printer beeps once if you press a control panel button when the
corresponding function is not available.
EPSON Status Monitor 3
EPSON Status Monitor 3 provides status messages and a graphic
display showing the current status of the printer.
display showing the current status of the printer.
Error: Ribbon out
O
Pause
•••
Ribbon is not installed.
Install the ribbon cartridge and press the
Pause button. See “Replacing the Ribbon
Cartridge” on page 130 for instructions.
Pause button. See “Replacing the Ribbon
Cartridge” on page 130 for instructions.
Error: Cover open
O
Pause
•••
The printer top cover is open.
Close the cover.
Print head hot
Please wait
Please wait
F
Pause
—
The print head is overheated.
Wait for a few minutes; the printer resumes
printing automatically once the print head
cools.
printing automatically once the print head
cools.
Error: xx
Turn off printer
Turn off printer
F
Paper Out
F
Pause
F
Tear Off/SetU
F
Top of Form/SetD
F
Front
F
Rear
•••••
An unknown printer error has occurred.
Turn off the printer and leave it off for several
minutes; then turn on the printer again. If the
error recurs, contact your dealer.
minutes; then turn on the printer again. If the
error recurs, contact your dealer.
State of panel lights
and message on
the LCD
and message on
the LCD
Beep
pattern
pattern
Problem
Solution