Epson C84WN User Manual
Setting Up a Network Port
31
4. On the Add Port window, make sure
Network
is selected, then click
Browse
.
You see the Browse for Printer window:
5. Click the + next to
Entire Network
, then click the + next to
Epson_lpr
and
select the Stylus C84 printer.
(Make sure the IP address matches your print server’s IP address.)
6. Click
OK
, then click
OK
again.
7. Click
Apply
on the Details tab.
8. To test the connection, click the
General
tab and click
Print Test Page
. Wait
for the page to print.
If the test page prints, click
Yes
, then click
OK
to close the Properties
window.
If it fails to print, try the following:
■
Make sure the printer and print server are connected and both are
turned on.
turned on.
■
Check the printer to see if a red light is on or flashing, indicating that
paper or ink is out, or paper is jammed. See Printer Basics for details.
paper or ink is out, or paper is jammed. See Printer Basics for details.
■
Check WP-Admin to make sure you have a signal (see page 24).
■
Make sure you selected the correct printer in step 5.
■
Make sure you clicked
Apply
in step 7.
Now you’re ready to print. For instructions, see Printer Basics.