Epson 900 User Manual
43
Macintosh Users
This section tells you how to set up the printer so that you can use it on an
AppleTalk
AppleTalk
®
network.
First, you need to install the printer software on the computers in the network,
following the instructions on the Start Here card. Then, you must select the printer in
the Chooser.
following the instructions on the Start Here card. Then, you must select the printer in
the Chooser.
Selecting the Printer in the Chooser
1. Turn on your printer.
2. Open the
Chooser
from the Apple menu and click the
SC 900(AT)
icon.
3. If you are using AppleTalk zones,
select the zone you want to use. A list
of all the printers connected to the
selected zone appears on the right.
Click the name assigned to the
EPSON Stylus COLOR 900.
of all the printers connected to the
selected zone appears on the right.
Click the name assigned to the
EPSON Stylus COLOR 900.
4. Click the Background Printing
buttons to turn background printing
on or off.
on or off.
5. Close the Chooser.
basics.book Page 43 Friday, January 8, 1999 11:57 AM