Panasonic KX-MC6260CX User Manual
3. Help
18
Detailed operating instructions are on the CD-ROM.
3 Help
Error Messages
3.1 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display
Cause & Solution
“
Access Error”
L
The access to an SD card did not work correctly due to some existing
problem. Press {Stop} to clear the message, or remove the SD card, and
then try again.
problem. Press {Stop} to clear the message, or remove the SD card, and
then try again.
“
Call Service”
L
There is something wrong with the unit. Contact our service personnel.
“
Change Supplies Toner
Empty”
“
“
Change Supplies Black
:Empty”
L
The toner cartridge life is finished. Replace the toner cartridge immediately.
Note:
L
“
Black”: Black toner
L
“
Cyan”: Cyan toner
L
“
Magenta”: Magenta toner
L
“
Yellow”: Yellow toner
“
Change Supplies Toner
Low”
“
“
Change Supplies Black
:Low”
L
The toner cartridge life is near its end. Replace the toner cartridge as soon
as possible.
as possible.
Note:
L
“
Black”: Black toner
L
“
Cyan”: Cyan toner
L
“
Magenta”: Magenta toner
L
“
Yellow”: Yellow toner
“
Change Supplies
Replace Waste Toner”
“
“
Change Supplies
Replace Waste Toner
Cartridge”
Cartridge”
L
The waste toner cartridge life is finished. Replace the waste toner cartridge
immediately.
immediately.
“
Change Supplies Waste
Toner Full”
L
The waste toner cartridge life is near its end. Replace the waste toner
cartridge as soon as possible.
cartridge as soon as possible.
“
Check Document”
L
The document was not fed into the unit properly. Remove the document,
and then press {Stop} to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers and try
again.
and then press {Stop} to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers and try
again.
“
Check Install Input
Tray #1”
L
The paper input tray is not installed correctly. Pull out the paper input tray
and re-insert it.
and re-insert it.
Note:
L
“
#1”: Standard input tray
L
“
#2”: Optional input tray
L
“
#1+#2”: Standard input tray and optional input tray
“
Check Paper”
L
You are printing on envelopes. Check the standard input tray to be sure that
envelopes are installed, and then press {Black}/{Colour}.
envelopes are installed, and then press {Black}/{Colour}.
L
The recording paper size is not the same as the size selected for copy.
Change the recording paper size setting (feature #380 or feature #382), and
install the appropriate recording paper.
Change the recording paper size setting (feature #380 or feature #382), and
install the appropriate recording paper.
L
The recording paper size is not the same as the size selected when printing
from the PC. Change the recording paper size setting (feature #380 or
feature #382), and install the appropriate recording paper.
from the PC. Change the recording paper size setting (feature #380 or
feature #382), and install the appropriate recording paper.
L
The recording paper size is not the same as the size selected for receiving
a fax. Change the recording paper size setting (feature #380 or feature
#382), and install the appropriate recording paper.
a fax. Change the recording paper size setting (feature #380 or feature
#382), and install the appropriate recording paper.
MC6040_6260CX-PNQW1377ZA-QRG-en.book Page 18 Wednesday, July 30, 2008 10:24 AM