Emulex NJ01B-NT+ User Manual

2048 

The printer server RCF port 

3)  Enter the password: 

> 

# access 

where access is the default printer server remote login password. 

4)  Verify banner. 

When the connection is made, the printer server login banner is 
displayed.  

5)  At Enter Username or Help>, enter any two characters. 

6)  At Server>, enter su: 

> 

Server> su 

This gives you supervisor status.   

7)  At Password>, enter system: 

> 

Password> system 

where system is the default privileged password which does not echo 
back. 

8)  At the Server>> prompt, view or change current parameters. 

Refer to the list of commands in the Command Reference Guide. 

9)  Logout of the printer server: 

> 

Server>> logout 

1)  Connect an ANSII compatible terminal or a PC running an ANSII 

terminal emulation program to the printer server serial or console port.   

Emulex default port configuration is set for 9600 bps, 8 data bits, no 
parity, 1 stop bit, DTE type, with softcopy emulation.