Emulex NP02 User Manual
Printer Server Installation 2-5
Peripheral Connection
Console/Serial Port
MAC ADDRESS
00-00-C9-01-A0-6A
NETJet
CONSOLE
UTP
1
2
BNC
Figure 2-5: Peripheral Connection
Serial Port
Connect to the serial port with a null modem cable. The serial port provides
an RJ-12 connector and allows user to:
an RJ-12 connector and allows user to:
• Print to a serial printer or plotter.
• Monitor the printer server by connecting an ANSII compatible terminal or
• Monitor the printer server by connecting an ANSII compatible terminal or
a PC running an ANSII terminal emulation program.
The Emulex default port configuration is set for 9600 bps, 8 data bits, no
parity, 1 stop bit, DTE type, with softcopy emulation.
parity, 1 stop bit, DTE type, with softcopy emulation.
• Input print jobs directly by connecting to a host system serial port (e.g. an
HP 3000).
NOTE: Serial cable between the printer server and the
peripheral device or console terminal should not
exceed 50 feet (15.24 meters). Connection can be
made through a null modem cable.
exceed 50 feet (15.24 meters). Connection can be
made through a null modem cable.