Panasonic DP-C263 User Manual
42
Chapter 3 Scanner Settings
Scanning Resolution
You can set the appropriate resolution according to your originals.
z
The standard setting of “Resolution” can be changed, refer to Scanner Settings in the Operating Instructions
(For Function Parameters) on the provided CD-ROM.
(For Function Parameters) on the provided CD-ROM.
z
Resolution settings are reset to their factory defaults when:
-The Reset key is pressed.
-The Auto Reset Time interval has lapsed (default = 1 min).
-The power is turned OFF.
-A scan job is completed.
-The Reset key is pressed.
-The Auto Reset Time interval has lapsed (default = 1 min).
-The power is turned OFF.
-A scan job is completed.
1
Select a desired resolution, and then
select “OK”.
select “OK”.
z
If the above screen is not displayed. (See
page 40, steps 1 to 3)
page 40, steps 1 to 3)
z
Most originals such as photos can be
scanned without problems using the default
resolution (200 dpi), and picture quality level
(Full Color).
To scan smaller characters (8-point or
smaller) clearly, increase the resolution or
select Adjustment, and then select High
Quality for Compression (Full Color).
Since the file size increases with higher
resolutions, the transfer time becomes
longer depending on the specifications of
the network, and the computer you are
using.
scanned without problems using the default
resolution (200 dpi), and picture quality level
(Full Color).
To scan smaller characters (8-point or
smaller) clearly, increase the resolution or
select Adjustment, and then select High
Quality for Compression (Full Color).
Since the file size increases with higher
resolutions, the transfer time becomes
longer depending on the specifications of
the network, and the computer you are
using.
Ex: The time required to transfer an 8.5" ×
11" size color photo scanned at 600 dpi
is three times as long as that for the
same photo scanned at 200 dpi.
is three times as long as that for the
same photo scanned at 200 dpi.