Ericsson SP4900HDR User Manual

The status check sheet shows some of the current default settings, the page 
count, and the status of the maintenance tank. 

1. Make sure paper is loaded in the printer.

2. Press r 

Menu

.

3. Press d to select 

TEST PRINT

, then press 

r

.

4. Press d to select 

STATUS SHEET

, then press r.

5. Press 

OK

 to start printing.

1. Press r 

Menu

.

2. Press d to select 

PRINTER STATUS

, then press r. 

3. Do one of the following:

•

To check the firmware version, press r

 

again. When done, press l.

•

To check the amount of ink left, press d to select 

INK LEVEL

, then 

press r. The percentage of ink left in the first cartridge is displayed. 
Continue pressing d to see the status of the remaining cartridges. 
When done, press l.

•

To check how much capacity the maintenance tank(s) have, press d 
to select 

MAINTENANCE BOX

, then press r.

 

The percentage 

remaining for each tank is displayed. As the tank is filled, the 
percentage drops. When done, press l.

•

To check job history, press d to select 

JOB HISTORY

, then 

press r. For the last 10 print jobs saved in the printer, you see the 
ink used (in milliliters) and paper used (in square centimeters). The 
most recent job is saved as No. 0. When done, press l. 

•

To check the total number of prints, press d to select 

TOTAL 

PRINTS

, then press r. When done, press l.

4. Press 

 to exit the menu.

Note: You can replace 
the ink cartridges, cutter 
blade, and maintenance 
tanks yourself. Other 
printer parts need to 
be replaced by an 
authorized service 
technician. 

Note: You can change 
the units of 
measurement from 
centimeters to inches 
and feet using 
maintenance mode on 
the printer’s control 
panel. See page 131 for 
instructions.