Samsung CLP-660 Series User Manual

7.9   

<Troubleshooting>

The life of the fuser 
unit is expired.

Replace the fuser unit 
with a new one. 
Contact the service 
representatives.

The life of the fuser 
unit will be expired 
soon.

Replace the fuser unit 
with a new one. 
Contact the service 
representatives.

The life of the 
transfer belt is 
expired.

Replace the paper 
transfer belt with a 
new one. Contact the 
service 
representatives.

The life of the 
transfer belt will be 
expired soon.

Replace the transfer 
belt with a new one. 
Contact the service 
representatives.

The life of the tray 
pick-up roller has 
expired.

Replace the pick-up 
roller with a new one. 
Contact the service 
representatives.

The LSU (Laser 
Scanning Unit) in 
your machine is 
checking problems 
detected. 

Wait a few minutes.

The engine in your 
machine is checking 
problems detected. 

Wait a few minutes.

The machine is in 
the power save 
mode.

When data is 
received, it switches 
to on-line 
automatically.

There is a problem 
with the main fan for 
the machine.

Cycle power. If the 
problem persists, 
contact the service 
representatives.

The toner cartridge 
which the arrow 
indicates has run 
out.

  Stop  

If the black toner 
cartridge is empty, 
Black Only 
message does not 
appear. 

You can select the 
option among Stop, 
Continue or Black 
Only with the left/right 
arrow. If you select 
Stop by pressing OK 
on the control panel, 
the machine stops 
printing. If you select 
Continue, the 
machine keeps 
printing, but the 
quality cannot be 
guaranteed. If you 
select Black Only, 
the machine prints 
the data in black. In 
this case, the mono 
printing feature is 
preset in the printer 
properties. 
If you do not select 
any, the machine will 
work as Stop is 
selected. Replace the 
corresponding toner 
cartridge with a 
Samsung-genuine 
cartridge. (Page 6.4) 

The lifespan of the 
toner cartridge 
which the arrow 
indicates is reached.

This message 
appears when the 
toner is completely 
empty, and your 
machine stops 
printing. Replace the 
corresponding toner 
cartridge with a 
Samsung-genuine 
cartridge. (Page 6.4)

The toner cartridge 
which the arrow 
indicates is almost 
empty.

Take out the 
corresponding toner 
cartridge and 
thoroughly shake it. 
By doing this, you can 
temporarily 
reestablish printing 
operations. 
(Page 6.3)

Paper has jammed 
in the optional tray.

Clear the jam. 
(Page 7.6)