Yamaha VL70-m User Manual

Play the Demo

Once you’ve set up your VL70-m system, you might like to play the pre-
programmed demo sequence to hear how some of the voices sound. This

process will also help to familiarize you with some of the VL70-m’s selection
and editing procedures.

■ NOTES
• When the demo is played all system setup parameters and current voice are initialized. If

your VL70-m memory contains data you want to keep, be sure to use the bulk dump
function (page 100) to save the data to an external MIDI data recorder or other appro-
priate storage device before playing the demo.

1. Select the Utility Mode

Press the [UTILITY] button to select the utility mode.

2. Select the Demo Mode

Use the SELECT [<] and [>] buttons to select the “DEMO” mode.

3. Press [ENTER] and Confirm

Press the [ENTER] button if it’s OK to go ahead with the demo. The VL70-
m will ask you to confirm: press [ENTER] again to proceed to the demo
song select display, or [EXIT] to abort.

4. Select a Song

Use the VALUE [-] and [+] buttons to select the demo song number you
want to start with.

5. Run the Demo

Press the [ENTER] button to run the demo. Playback will start with the
selected song, then all other songs will be played in sequence. The cycle will
repeat until stopped.

6. Stop the Demo

Press the [EXIT] button to stop demo playback. This will return you to the
demo song select display.

7. Return To the Play Mode When Done

Press the [PLAY] button to return to the PLAY mode.

Setting Up