Yamaha VL70-m User Manual

Settings: 01 … 16, OFF

Sets the MIDI receive channel on which the VL70-
m will receive data from your keyboard or other
controller. The receive channel must be set to the
same channel that the controlling device is trans-
mitting on (“01” through “16”). When “OFF” is
selected, the VL70-m will not receive any data
from external MIDI devices.

Settings: 112 … 119, Pr1, Pr2, Cst, Int

Selects the VL70-m voice bank: 112 through 119,
PRESET 1 (Pr1), PRESET 2 (Pr2), CUSTOM
(Cst), or INTERNAL (Int). See “Voice Organiza-
tion” on page 26.

Settings: 001 … 128

Selects the voice to played on the VL70-m. Banks
112 through 119 allow selection of voice numbers
from “022” to “128”, although some voice num-
bers are skipped since the VL70-m does not have a
full basic XG voice set. The PRESET 1 and
PRESET 2 banks each have voice numbers from
“001” to “128”, while the CUSTOM bank has
voice numbers from “001” to “006”, and the
INTERNAL bank has voice numbers from “001”
to “064”

Settings: 000 … 127

Sets the volume of the current voice. The higher
the value the louder the volume.

Settings: 000 … 127

Sets the expression level of the current voice. The
higher the value the higher the expression level.

Settings: Rnd, L63 … C … R63

Sets the pan position of the current voice — i.e.
the position of the voice between left and right in
the stereo sound field. A setting of “L63: sets the
pan position full left, “C” sets the pan at center,
and “R63” sets the pan full right. In between
settings produce corresponding intermediate pan
positions. The “Rnd” setting produces a randomly-
generated pan position.