Printek 4503 User Manual
Epson FX Emulation
Page 3-16
Vertical Position
Line Feed
LF
Causes the current line to be printed, and then advances the paper one line at the
current line spacing. If "Auto CR: On" is selected in the "Setup: INTERFACE"
menu, a carriage return will also be performed.
current line spacing. If "Auto CR: On" is selected in the "Setup: INTERFACE"
menu, a carriage return will also be performed.
Control code:
LF
Hexadecimal:
0A
Variable Distance Line Feed
ESC J n
Causes the current line to be printed, and then performs a single line feed of n/216ths
of an inch. 0
of an inch. 0
≥
n
≥
255. Does not change the current line spacing. If "Auto CR: On" is
selected in the "Setup: INTERFACE" menu, a carriage return will also be performed.
Example: The following escape sequence will advance the paper one half inch.
Escape Sequence:
ESC
J
108
Hexadecimal:
1B
4A
6C
Variable Distance Reverse Line Feed
ESC j n
Performs a single reverse line feed of n/216ths of an inch. 0
≥
n
≥
255. Does not
change the current line spacing. If "Auto CR: On" is selected in the "Setup:
INTERFACE" menu, a carriage return will also be performed.
INTERFACE" menu, a carriage return will also be performed.
Example: The following escape sequence will move the paper down one half inch.
Escape Sequence:
ESC
j
108
Hexadecimal:
1B
6A
6C