Printek 4503 User Manual

Page 5-14

Vertical tab stops are associated with lines, not absolute physical positions.  Changing
line spacing will change the physical position of the tab stops.

Causes the current line to be printed, and then advances the paper to the next vertical
tab stop.  If no vertical tab stops are set, then a line feed is done instead.  If "Auto CR:
On" is selected in the "Setup: INTERFACE" menu, a carriage return will also be
performed.

Control code:

VT

Hexadecimal:

0B

Sets a vertical tab stop at the current line. The tab stop is associated with the active
line, not an absolute physical position.  Changing line spacing will change the
physical position of the tab stop.

The tab stop set by this escape sequence will be added to previously set tab stops.  If
this is not desired, the old tab stops should first be cleared.

Control code:

VTS

Hexadecimal:

8A

Escape Sequence:

ESC

J

Hexadecimal:

1B

4A

Escape Sequence:

ESC

3

Hexadecimal:

1B

33

ESC [ n1 ; n2 ; ... nx v

Sets new vertical tab stops at line n1, n2, n3, etc.  1

≥

≥

255.  The tab stops are

associated with lines, not absolute physical positions.  Changing line spacing will
change the physical position of the tab stops.  The first line is line one.

The tab stops set by this escape sequence will be added to previously set tab stops.  If
this is not desired, the old tab stops should first be cleared.