Ricoh Priport User Manual
Adjusting the Print Image Position
9
1
Adjusting the Print Image Position
After master making, you can adjust
the print image position to suit your
needs. There are two ways:
the print image position to suit your
needs. There are two ways:
❖
❖
❖
❖
Shifting the Image Position Forward
or Backward
or Backward
Shift the image position using the
{
Image Position
} keys.
❖
❖
❖
❖
Shifting the Image Position to the
Right or Left
Right or Left
Shift the image position using the
side tray fine adjusting dial.
side tray fine adjusting dial.
Shifting the Print Image
Position Forward or Backward
Position Forward or Backward
* Paper feed direction
A
Press the left
{{{{
Image Position
}}}} key
to move the image forwards, the
right key to move it backwards.
right key to move it backwards.
Note
❒ When you shift the image for-
wards, leave a margin (more
than 5mm, 0.2") at the leading
edge. If there is no margin, pa-
per might wrap around the
drum and cause a misfeed.
than 5mm, 0.2") at the leading
edge. If there is no margin, pa-
per might wrap around the
drum and cause a misfeed.
❒ The right or left
{
Image Position
}
keys shift the image about
0.5mm, 0.02" each time they are
pressed. When the indicator
changes, the image position
shifts about 5mm, 0.2".
0.5mm, 0.02" each time they are
pressed. When the indicator
changes, the image position
shifts about 5mm, 0.2".
B
Press the
{{{{
Proof
}}}} key to check the
image position.
GRFORW0E
TSLS015E
TSLS013E
SilverV-gb.book Page 9 Monday, May 15, 2000 3:32 PM