Ricoh SP C440DN User Manual

Alert Messages (Displayed on the Control Panel)

Message

Cause

Solution

" (A) Remove misfeed in
Trays. Opn & cls Frt.Cov."

Remove paper from the Tray 1
and then reload paper. Then
open the front cover and then
close it again, so the error
message disappears.

" (B) (C) Open Front
Cover and remove the
paper."

Open the front cover and remove
any jammed paper from the
internal paper feed path.

" (Y1) Remove misfeed in
Tray 2. Opn & cls Frt. Cov."

Open Tray 2 and remove the
jammed paper. To reset the error,
open the front cover and then
close it.

" (Y2) Remove misfeed in
Tray 3. Opn & cls Frt. Cov."

Open Tray 3 and remove the
jammed paper. To reset the error,
open the front cover and then
close it.

" (Y3) Remove misfeed in
Tray 4. Opn & cls Frt. Cov."

Open Tray 4 and remove the
jammed paper. To reset the error,
open the front cover and then
close it.

" (Z) Open Frt. Cov and
remove paper in Dup.Feed."

Open the front cover and remove
any jammed paper from the
internal paper feed path.

" Add toner. Replace
Toner Cartridge."

The toner has run out. Replace the
print cartridge.

For details, see "Adding Toner
(Print Cartridge)", Operating
Instructions.

" Toner is almost empty."

The print cartridge is almost
empty.

For details, see "Adding Toner
(Print Cartridge)", Operating
Instructions.

" Waste Toner Bottle full"

The waste toner bottle is full.
Replace the waste toner bottle.

For details, see "Replacing Other
Consumables", Operating
Instructions.

When Messages Are Displayed