Ricoh CL3000e User Manual
Operating Instructions
Administrator Reference
204
❖
❖
❖
❖ Reference
msh> sntp
❖
❖
❖
❖ NTP Server Address Configuration
You can specify the IP address of the NTP server.
msh> sntp server IP_address
❖
❖
❖
❖ Interval Configuration
You can specify the interval at which the printer synchronizes with the operator-specified NTP serv-
er.
er.
msh> sntp interval polling_time
Note
❒
The factory default setting is 3600 seconds.
❒
You can set the interval from 16 to 16384 seconds.
❒
If you set 0, the printer synchronizes with the NTP server only when you turn the printer on. After
that, the printer does not synchronize with the NTP server.
that, the printer does not synchronize with the NTP server.
❖
❖
❖
❖ Time-zone Configuration
You can specify the time difference between the printer clock and the NTP server clock.
msh> sntp timezone +/-hour_time
Example: To set the time-zone difference to +8 hours:
msh> sntp timezone +08:00
Note
❒
The time is in 24-hour notation.