Ricoh DSc432 User Manual
Troubleshooting
108
6
The main power indicator
continues blinking and
does not turn off when
pressed.
continues blinking and
does not turn off when
pressed.
This occurs in the follow-
ing cases:
ing cases:
• The exposure glass cov-
er or the ADF is open.
• The machine is commu-
nicating with external
equipment.
equipment.
• The hard disk is active.
Close the exposure glass cover or
ADF, and check if the machine com-
municating with a computer.
ADF, and check if the machine com-
municating with a computer.
“
Self Checking...
”
appears.
The machine is preforming
image adjustment opera-
tions.
image adjustment opera-
tions.
The machine may perform periodic
maintenance during operations. The
frequency and duration of mainte-
nance depends on the humidity,
temperature, and printing factors
such as number of prints, paper
size, and paper type. Wait for the
machine to get ready.
maintenance during operations. The
frequency and duration of mainte-
nance depends on the humidity,
temperature, and printing factors
such as number of prints, paper
size, and paper type. Wait for the
machine to get ready.
Original images are print-
ed on the reverse side of
the paper.
ed on the reverse side of
the paper.
You may have loaded the
paper incorrectly.
paper incorrectly.
Load paper correctly. Load paper
into Tray 1-4 with the print side up,
and into the LCT or bypass tray
with the print side down. See p.114
“Orientation-Fixed Paper or Two-
Sided Paper”.
into Tray 1-4 with the print side up,
and into the LCT or bypass tray
with the print side down. See p.114
“Orientation-Fixed Paper or Two-
Sided Paper”.
The back of the printed
sheet is smeared with ink.
sheet is smeared with ink.
The copier's internal parts
may have become smeared
with ink when misfed pa-
per was removed.
may have become smeared
with ink when misfed pa-
per was removed.
Copy (print) a few sheets to remove
the smeared ink.
the smeared ink.
The guide boards may be
smeared with ink.
smeared with ink.
Clean the guide boards. See p.145
“Cleaning the Guide Boards”
“Cleaning the Guide Boards”
Misfeeds occur frequently.
The tray's side guides may
not be locked or may not be
set properly.
not be locked or may not be
set properly.
Check the side guides are locked
and set properly. See p.124 “Chang-
ing the Paper Size”.
and set properly. See p.124 “Chang-
ing the Paper Size”.
The tray's end guide may
not be set properly.
not be set properly.
Check the end guide is set properly.
See p.124 “Changing the Paper
Size”.
See p.124 “Changing the Paper
Size”.
You may have loaded pa-
per of a size not shown on
the paper size selector.
per of a size not shown on
the paper size selector.
When using paper of a size that can-
not be detected automatically, use
Tray Paper Settings to set the paper
size. See p.56 “Tray Paper Size:
(Tray 1-4)” and p.165 “Copy Paper”.
not be detected automatically, use
Tray Paper Settings to set the paper
size. See p.56 “Tray Paper Size:
(Tray 1-4)” and p.165 “Copy Paper”.
Something has been placed
on the 500- or 1000-sheet
finisher tray.
on the 500- or 1000-sheet
finisher tray.
Do not place anything on the finish-
er tray. Doing so may cause paper
misfeeds.
er tray. Doing so may cause paper
misfeeds.
Problem
Causes
Solutions
ThemisC1_AE_zentai_pre_FM.book Page 108 Thursday, July 28, 2005 2:13 PM