Ricoh SP 4510DN User Manual

Message

Cause

Solution

"@Remote Cert. update failed"

Updating the @Remote
certificate failed.

Turn the printer off, and then
turn it on again. If the
problem persists, contact
your sales or service
representative.

"Cannot connect=>Comm.Serv.
Check proxy user/password."

The proxy user name or
password is incorrect.

Check the proxy server
settings, and then change the
user name and/or password
if they are incorrect.

"Cannot connect with DHCP server.
(101/201)"

An IP address cannot be
obtained from the DHCP
server.

Contact your network
administrator.

"Cannot connect with NetWare print
server. (107/207)"

No connection with the
NetWare print server is
available.

Contact your network
administrator.

"Cannot connect with NetWare
server.(106/206)"

No connection with the
NetWare print server is
available.

Contact your network
administrator.

"Cannot print."

The printer cannot print the
sent data.

Check that the file you want
to print is a supported file
type.
Check the misfeeds and ask
your network administrator
for help.

"Change (Tray name) to the following
settings:"

The size of the paper in the
tray does not match the
paper size specified in the
printer driver.

Select a tray containing
paper that is the same size as
the specified paper size.

"Check network settings.(103/203)"

The IP address setting is
incorrect.

Check the IP address, subnet
mask, and gateway address.

"Classification Code Error"

A classification code is not
specified for the print job.

Enter a classification code
using the printer properties
and print the document
again.

3. Troubleshooting