Ricoh 2018D User Manual

Appendix

92

❒ Enter the printer name using up to

15 characters.

❒ You cannot use a printer name

starting with “RNP” or “rnp”.

❒ The Ethernet interface and IEEE

802.11b interface will have the
same printer name.

Use the “wins” command to config-
ure WINS server settings.

❖

❖

❖

❖ Viewing setting

The following command displays
the WINS server IP address:

msh> wins
Example output:

msh> wins
WINS Configuration:
interface_name:
WINS: On
p r i m a r y   s e r v e r   0 . 0 . 0 . 0
secondary server 0.0.0.0
ScopeID
Current configuration:
p r i m a r y   s e r v e r   0 . 0 . 0 . 0
secondary server 0.0.0.0
hostname  host_name Sco-
peID

❒ If the IP address obtained from

DHCP differs from the WINS IP
address, the DHCP address is
the valid address.

❖

❖

❖

❖ Configuration

Use the “set” command to make
WINS active or inactive.

msh> wins interface_name
{on | off}

• “on” means active; “off” means

inactive.

❖

❖

❖

❖ Setting WINS Server Address

You can make settings for the
WINS server address.

msh> wins interface_name
{ p r i m a r y | s e c o n d a r y }
IP_address

• “primary” is for setting the pri-

mary WINS server address.

• “secondary” is for setting the

secondary WINS server ad-
dress.

❖

❖

❖

❖ NBT scope ID setting

You can configure the NBT scope
ID.

❒ Enter a scope ID using up to 31

alphanumeric characters.

msh> wins interface_name
scope scope_ID

❒ If you receive different scope

IDs from DHCP and WINS, the
scope ID from DHCP takes pri-
ority.

*1

Available when the optional

802.11b interface unit is installed.

*2

Available when the optional 1394

interface board is installed.

ether

Ethernet interface

IEEE 802.11b interface

ip1394 

IEEE 1394 interface