Pelco cm6800-322x6 User Manual

56

C1522M-C (2/05)

If you select a restricted camera view, the camera view does not appear on that monitor. The previously selected, unrestricted camera
view remains on the monitor.

1. Enter the camera number.

1. Enter the camera number.

2. Press the CAM key.

2. Press the CAM key.

OR

OR

Press the BWD or FWD key to scroll through the available cameras.

Press the PREV or NEXT key to scroll through the available cameras.

OR

From the Camera Menu, select 

 or 

 to scroll through the

available cameras.

Select a suitable camera and operate a PTZ function. A keyboard with “view-only” access can view the signal from the specified camera
but cannot control the camera.

Extended Coaxitron protocol receivers can be operated without any programming changes. Other receiver control protocols require
programming changes. Refer to the 

Programming section.

Receiver control is not available with the KBD100 keyboard.

Press and hold the appropriate pan/tilt key until the camera
reaches the desired position. To change the speed of movement,
press a number (1-9) key first (1=slowest, 9=fastest). Press and
hold the appropriate zoom key until the desired effect is seen.

Press and hold the appropriate lens control key until the desired
effect is seen.

Move the joystick until the camera reaches the desired position.
To increase the speed of movement, move the joystick farther
from center.

Twist the joystick clockwise to zoom in, counterclockwise to
zoom out.

Press and hold the appropriate lens control key until the desired
effect is seen.

Move the joystick until the camera reaches the desired position.
To increase the speed of movement, move the joystick farther
from center or press the T key to pan at turbo speed.

Twist the joystick clockwise to zoom in, counterclockwise to
zoom out. Or use the IN/OUT key to zoom in or out.

Use the NEAR/FAR key to focus near or far.

Use the OPEN/CLS key to open or close the iris.