Lexmark X925de User Manual

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply
with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Ambient temperature

15.6 to 32.2°C (60 to 90°F) and 8% to 80% RH

Shipping and storage temperature

-40°C to 43.3°C (110° Fahrenheit)

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for Class I
(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is
nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system
and printer are designed so there is never any human access to laser radiation above a Class I level during normal
operation, user maintenance, or prescribed service condition.

The following table documents the power consumption characteristics of the product.

Note: Some modes may not apply to your product.

Printing

The product is generating hard

‑copy output from electronic inputs.

650 W

Copy

The product is generating hard

‑copy output from hard‑copy original

documents.

725 W

Scan

The product is scanning hard

‑copy documents.

190 W

Ready

The product is waiting for a print job.

130 W

Sleep Mode The product is in a high

‑level energy‑saving mode.

27 W

Hibernate

The product is in a low

‑level energy‑saving mode.

6.1 W

Off

The product is plugged into a wall outlet, but the power switch is turned off.

.0 W

Notices

311