Lexmark MX610de User Manual

To access the menu, navigate to either of the following:

Network/Ports > Standard Network > Standard Network Setup > Network Card

Network/Ports > Network [x] > Network [x] Setup > Network Card

Connected
Disconnected

View the connection status of the network card.

View the speed of an active network card.

UAA
LAA

View the network addresses.

Job Timeout
0–255 seconds

Set the amount of time it takes for a network print job to be canceled.

90 seconds is the factory default setting.

A setting value of 0 disables the timeout.

If a value of 1–9 is selected, then the setting is saved as 10.

To access the menu, navigate to either of the following:

Network/Ports > Standard Network > Standard Network Setup > TCP/IP

Network/Ports > Network [x] > Network [x] Setup > TCP/IP

Note: This menu is available only in network printers or printers attached to print servers.

Set the current TCP/IP host name.

Note: This can be changed only from the Embedded Web Server.

View or change the current TCP/IP address.

Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.

View or change the current TCP/IP netmask.

View or change the current TCP/IP gateway.

On
Off

Specify the DHCP address and parameter assignment.

Note: On is the factory default setting.

On
Off

Specify the RARP address assignment setting.

Note: Off is the factory default setting.

Understanding the printer menus

152