Lexmark X548dte User Manual
Printing photos from a PictBridge
‑enabled digital camera
You can connect a PictBridge
‑enabled digital camera to the printer, and use the buttons on the camera to select and
print photos.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with your camera.
2
Insert the other end of the USB cable into the USB port on the front of the printer.
Notes:
•
Make sure the PictBridge
‑enabled digital camera is set to the correct USB mode. See the camera
documentation for more information.
•
If the PictBridge connection is successful, then a confirmation message appears on the printer display.
3
Follow the instructions on the camera to select and print photos.
Note: If the printer is turned off while the camera is connected, then you must disconnect and then reconnect the
camera.
camera.
Printing information pages
Printing a font sample list
1
From the home screen, navigate to:
> Reports > Print Fonts
2
Touch PCL Fonts or PostScript Fonts.
Printing a directory list
A directory list shows the resources stored in a flash memory or on the printer hard disk.
From the home screen, navigate to:
> Reports > Print Directory
Printing
72