Yamaha RXV3000RDS User Manual

17

This unit is equipped with six additional input jacks (left and right MAIN, CENTER, left and right SURROUND and SUBWOOFER) for
discrete multi-channel input from an external decoder, sound processor, or pre-amplifier. Connect the output jacks on your external decoder
to the 

 jacks.

Be sure to match the left and right outputs to the left and right input jacks for the main
and surround channels.
To listen to the sound from your external decoder, press 

 on this unit or

the remote control.

• When you select 

 as the input source, this unit automatically turns off the

digital sound field processor, and you cannot listen to DSP programs.

• When you select 

 as the input source, chaging SPEAKER SET on the SET

MENU is not affected.

If you want to increase the power output to the speakers, or want to use another amplifier, connect an external amplifier to the 

 terminals as follows.

R

L

CENTER

R

L

q

w

e

t

y

r

q

Front Effect channel line output jacks.

w

Rear channel line output jacks.

e

Main, Center, and Rear channel frequencies below 90 Hz are
output through these jacks. You can also direct DTS and Dolby
Digital LFE signals to this output.
Adjust the volume level of the subwoofer with the control on
the subwoofer. Subwoofer volume cannot be adjusted from this
unit.

r

Center channel line output jack.

t

Rear Center channel line output jack.

y

 jacks .......... Line input to this unit’s Main channel

amplifiers.

When connecting to these jacks, signals input to the
preamplifier of this unit will not be output from the main
amplifier of this unit.

 jacks ..... Main channel line output jacks.

The signals output through these jacks
are affected by 

, 

,

, and 

settings.