Yamaha RXV3000RDS User Manual

35

 allows you to record one source while viewing and/or listening to another source.

Turn on the power to this unit and all connected component.

Select the source component you want to record using 

.

• To record the current source, set 

 to 

.

• To record a source that you do not want to reproduce, set 

 to the

source you want to record.

Start playback (or select a broadcast station) on the source component.

Start recording on the recording component.

• If you want to listen to another source, and 

 is not set to

, select the source you want to reproduce with the 

selector and adjust the volume.

• Do a test recording before you start an actual recording.

• When this unit’s power is off, you cannot record between other component

connected to this unit.

• Operating 

 and 

, 

, 

, 

,

and DSP programs do not affect the recorded signal.

■

The DTS signal is a digital bitstream. Attempting to digitally record the DTS
bitstream will result in noise being recorded. Therefore, if you want to use this unit
to record sources that have DTS signals recorded on them, the following
considerations need to be made.

For DTS encoded LDs, DVDs, and CDs:
Only 2-channel analog audio signals may be recorded as follows:

LDs:
Set your Laser Disc player’s left and right outputs to the analog soundtrack.

DVDs:
Use the disc menu to set the DVD player’s mixed 2-channel left and right
audio outputs to the PCM or Dolby Digital soundtrack.

CDs:
The DTS signal recorded on CDs can only be output as a digital bitstream,
and therefore cannot be recorded.

STANDBY

/ON

REC OUT

VIDEO AUX

VCR 1

SAT

CABLE

D-TV/LD

DVD

SOURCE

MD/TAPE

CD-R

TUNER

CD

PHONO

VCR 2/DVR