Lexmark 26C0235 User Manual
•
The Fax option must be configured and enabled in the PostScript driver under the Configuration tab before it
can be used.
can be used.
•
If the Always display settings prior to faxing check box is selected, then you are prompted to verify the
recipient information before the fax is sent. If this check box is cleared, then the queued document is sent
automatically as a fax when you click OK on the Fax tab.
recipient information before the fax is sent. If this check box is cleared, then the queued document is sent
automatically as a fax when you click OK on the Fax tab.
Creating shortcuts
Creating a fax destination shortcut using the Embedded Web Server
Instead of entering the entire phone number of a fax recipient on the printer control panel each time you want to send
a fax, you can create a permanent fax destination and assign a shortcut number. You can create a shortcut to a single
fax number or a group of fax numbers.
a fax, you can create a permanent fax destination and assign a shortcut number. You can create a shortcut to a single
fax number or a group of fax numbers.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
in the TCP/IP section.
2
Click Settings.
3
Click Manage Destinations.
Note: A password may be required. If you do not have an ID and password, get one from your system support
person.
person.
4
Click Fax Shortcut Setup.
5
Type a unique name for the shortcut, and then enter the fax number.
To create a multiple
‑number shortcut, enter the fax numbers for the group.
Note: Separate each fax number in the group with a semicolon (;).
6
Assign a shortcut number.
If you enter a number that is already in use, you are prompted to select another number.
7
Click Add.
Creating a fax destination shortcut using the printer control panel
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the printer control panel, press the Fax button.
To:
appears on the first line, and the time and date appear on the second line.
4
Press
.
Address Book Search
appears.
5
Press the arrow buttons until Add appears, and then press
.
Faxing
101