Lexmark 26C0235 User Manual

Yes
No

Instructs the printer to run the setup wizard

Yes is the factory default setting.

After completing the setup wizard by selecting Done at the
Country select screen, the default setting becomes No.

U.S.
Metric

Specifies the printer factory default measurements. The default
setting is determined by the country selection in the initial setup
wizard.

<port range>

Specifies a valid port range for printers behind a port blocking
firewall. The valid ports are specified by two sets of numbers
separated by a semicolon.

Note: 9751:12000 is the factory default setting.

Copy
Fax

Sets the function the printer enters when Go, Content, Darkness,
or any number is pressed on the printer control panel

Note: Copy is the factory default setting

MM

‑DD‑YYYY

DD

‑MM‑YYYY

YYYY

‑MM‑DD

Formats the printer date

Note: MM

‑DD‑YYYY is the US factory default setting and

DD

‑MM‑YYYY is the international factory default setting.

12 hour A.M./P.M.
24 hour clock

Formats the printer time

Note: The factory default setting is 12 hour A.M./P.M.

Alarm Control
Cartridge Alarm

Sets an alarm to sound when the printer requires operator
intervention. Available selections for each alarm type are:

Off
Single
Continuous

Single is the factory default setting for Alarm Control. Single
sounds three quick beeps.

Off means no alarm will sound.

Continuous repeats three beeps every 10 seconds.

Power Saver

Disabled
1–240

Specifies the number of minutes of inactivity before some systems
begin entering a minimum power state.

Note: 30 minutes is the factory default setting.

Screen Timeout

15–300

Sets the amount of time in seconds the printer waits before
returning the printer display to a Ready state

Note: 30 seconds is the factory default setting.

Understanding printer menus

137