Lexmark 26C0235 User Manual

Print Timeout

Disabled
1–255

Sets the amount of time in seconds the printer waits to receive an
end

‑of‑job message before canceling the remainder of the print job

90 seconds is the factory default setting.

When the timer expires, any partially printed page still in the
printer is printed, and then the printer checks to see if any
new print jobs are waiting.

Print Timeout is available only when using PCL or PPDS
emulation. This setting has no effect on PostScript emulation
print jobs.

Wait Timeout

Disabled
15–65535

Sets the amount of time in seconds the printer waits for additional
data before canceling a print job

40 seconds is the factory default setting.

Wait Timeout is available only when the printer is using
PostScript emulation. This setting has no effect on PCL or
PPDS emulation print jobs.

Auto Continue

Disabled
5–255

Lets the printer automatically continue printing from certain offline
situations when not resolved within the specified time period

Disabled is the factory default setting.

5–255 is a range of time in seconds.

Jam Recovery

On
Off
Auto

Specifies whether the printer reprints jammed pages

Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the pages
is needed for other printer tasks.

On sets the printer to always reprint jammed pages.

Off sets the printer to never reprint jammed pages.

Page Protect

On
Off

Lets the printer successfully print a page that may not have printed
otherwise

Off is the factory default setting. Off prints a partial page
when there is not enough memory to print the whole page.

On sets the printer to process the whole page so that the
entire page prints.

Understanding printer menus

138