Lexmark 26C0235 User Manual
7
Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so
you can print wirelessly.
you can print wirelessly.
8
Follow the instructions on the computer screen.
Note: For more information on allowing other computers on the network to use the wireless printer, see the
Networking Guide.
Networking Guide.
Installing the printer on a wireless network (Macintosh)
Note: Make sure to disconnect the Ethernet cable when installing the printer on a wireless network.
Prepare to configure the printer
1
Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.
3 DE
F
6 M
NO
9W
XYZ
#
2 AB
C
5 JK
L
8 TU
V
0
1@
!.
GHI
4
PQRS
7
*
2
Locate the printer MAC address.
a
From the printer control panel, navigate to:
> Reports >
> Network Setup Page >
or
> Reports > Network Setup Page
b
In the Standard Network Card section, look for UAA (MAC).
Note: You will need this information later.
Enter the printer information
1
Access the AirPort options:
In Mac OS X version 10.5 or later
From the Apple menu, navigate to either of the following:
•
System Preferences > Network > Wi
‑Fi
•
System Preferences > Network > AirPort
Additional printer setup
37