Lexmark 030 User Manual

Page of 225
Menu item
Description
Portrait Height
3–48 inches
76–1219 mm
Sets the portrait height
Notes:
48 inches is the US factory default setting. Inches can be increased in
0.01
‑inch increments.
1219 mm is the international factory default setting. Millimeters can
be increased in 1
‑mm increments.
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
Feed Direction
Short Edge
Long Edge
Specifies the feed direction
Notes:
Short Edge is the factory default setting.
Long Edge appears only if the longest edge is shorter than the
maximum width supported by the tray.
Reports menu
Reports menu
Menu item
Description
Menu Settings Page
Prints a report containing information about the paper loaded into trays, installed
memory, total page count, alarms, timeouts, printer control panel language,
TCP/IP address, status of supplies, status of the network connection, and other
information
Device Statistics
Prints a report containing printer statistics such as supply information and details
about printed pages
Network Setup Page
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Note: This menu item appears only in network printers or in printers connected
to print servers.
Network [x] Setup Page
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
This selection is available when more than one network option is installed.
This menu item appears only in network printers or in printers connected
to print servers.
Profiles List
Prints a list of profiles stored in the printer
Print Fonts
PCL Fonts
PostScript Fonts
Prints a report of all the fonts available for the printer language currently set in
the printer
Note: A separate list is available for PCL and PostScript emulations.
Understanding printer menus
104