Lexmark 035 User Manual
260 paper jam
Touch Status/Supplies to identify the location of the jam. The envelope feeder feeds envelopes from the bottom of
the stack; the bottom envelope will be the one that is jammed.
the stack; the bottom envelope will be the one that is jammed.
1
Lift the envelope weight.
2
Remove all envelopes.
3
If the jammed envelope has entered the printer and cannot be pulled out, then lift the envelope feeder up and then
out of the printer, and then set it aside.
out of the printer, and then set it aside.
4
Remove the envelope from the printer.
Note: If you cannot remove the envelope, then the print cartridge will have to be removed. For more
information, see “200 and 201 paper jams” on page 132.
information, see “200 and 201 paper jams” on page 132.
5
Reinstall the envelope feeder. Make sure it snaps into place.
6
Flex and stack the envelopes.
7
Load the envelopes in the envelope feeder.
8
Adjust the paper guide.
9
Lower the envelope weight.
10
Touch Continue.
270–279 paper jams
To clear a jam in the high
‑capacity output stacker or the 4‑bin mailbox:
1
Touch Status/Supplies to identify the location of the jam.
2
If the paper is exiting into a bin, then pull the paper straight out, and then touch Continue.
If not, then continue with step 3.
3
Pull down the output bin door or doors.
4
Remove the jammed paper.
5
Close the output bin door or doors.
6
Touch Continue.
280–282 paper jams
1
Touch Status/Supplies to identify the location of the jam.
2
Pull down the StapleSmart finisher door.
3
Remove the jammed paper.
4
Close the StapleSmart finisher door.
5
Touch Continue.
Clearing jams
138