Lantronix LPS1-T User Manual
6-1
6: LAT Configuration
The EZWebCon configuration software is the easiest way to configure the MPS. The fol-
lowing sections cover print configuration methods for LAT hosts.
lowing sections cover print configuration methods for LAT hosts.
Note:
The MPS needs an IP address before you can use EZWebCon. See
Setting the IP Address on page 4-1 for instructions.
Setting the IP Address on page 4-1 for instructions.
LAT print queues can be created by printing to a port or printing to a service. Printing
directly to a port requires no MPS configuration.
directly to a port requires no MPS configuration.
Note:
Printing directly to a port is the easiest method for printing to the
MPS. If you would like instructions for printing to a service, see the
Print Server Reference Manual located on the CD-ROM.
MPS. If you would like instructions for printing to a service, see the
Print Server Reference Manual located on the CD-ROM.
6.1 Printing Directly to a Port
1
Create a LAT application port that references the MPS port.
Figure 6-1: Creating LAT Application Port
2
Create and start a print queue that uses the LAT application port.
Figure 6-2: Creating and Starting Print Queue
3
Add the commands to the SYS$MANAGER:LAT$STARTUP.COM file so the
required LAT devices will be recreated after each host reboot.
required LAT devices will be recreated after each host reboot.
Note:
LAT terminal device characteristics may have to be changed to cor-
rectly print certain files. See your VMS documentation for more in-
formation.
rectly print certain files. See your VMS documentation for more in-
formation.
4
Print to the queue.
Figure 6-3: Printing to Queue
$ RUN SYS$SYSTEM:LATCP
LATCP> CREATE PORT LTAnnn/APPLICATION
LATCP> SET PORT LTAnnn/NODE=MPS_xxxxxx/PORT=Port_n
LATCP> EXIT
$ INITIALIZE/QUEUE/START/ON=LTAnnn:/PROCESSOR=LATSYM
/RETAIN=ERROR queue_name
$ PRINT/QUEUE=queue_name filename.txt