LevelOne EPS-3001TU User Manual

 

This section describes how the LevelOne Printer Server functions in the Novell NetWare 
environment. 

The LevelOne Printer Server fully supports both Bindery and NDS Novell systems, and be 
configured as either a NetWare Printer Server or NetWare Remote Printer. 

Novell Distributed Printing Services (NDPS) using TCP/IP under NetWare 5 is also 
supported. See page 44 for details. 

Logical Printers can be used to create a “Virtual” printer. Single port models support 3 
logical printers, while multi-port models support 8 logical printers.  

The Logical Printers are named L1, L2, and L3; or L1 to L8 on multi-port models. The 
names can not be changed. 

PCONSOLE or NWAdmin must be used to create new (logical) printers and assign print 
queues to the printers. When creating logical printers, NetWare Printer 8 corresponds to 
Logical printer L1 on the LevelOne Printer Server, printer 9 to Logical printer L2, and so 
on up to printer 15 (logical printer L8). 

The LevelOne Printer Server requires the following data, if logical printers are going to be 
used.  

Physical Port  

Select the parallel port (P1 to P3) for this Logical Printer  

The printer control string (in Hex) to be sent to the printer 
before each print job. 

The printer control string (in Hex) to be sent to the printer 
after each print job. 

Convert LF to 
CR+LF  

If ON, LF (line feed) characters are changed to CR+LF 
(carriage return + line feed). If OFF, no conversion is 
done. 

 

- 27 -