Sharp MX-4501N User Manual

A different type of paper can be inserted in positions corresponding to front and back covers of a copy job when the 
automatic document feeder is used. A different type of paper can also be automatically added as an insert at specified 
pages.

Example of adding covers

Example of adding covers/inserts

Example of adding inserts

There are various ways of using covers and inserts. To 
keep the explanations simple, covers and inserts are 
explained separately. Refer to "

" (page 163) as needed.

• Load the cover/insert paper in the tray before using the cover/insert function.
• Before selecting the cover/insert function, place the originals in the document feeder tray, select 1-sided or 2-sided 

copying, and select the number of copies and any other desired copy settings. When these settings have been 
completed, perform the procedure to select covers/inserts.

• The originals must be scanned using the automatic document feeder. The document glass cannot be used.
• Up to 100 cover/insert sheets can be inserted. Note that two insert sheets cannot be inserted between the same 

pages.

• This function cannot be used in combination with the saddle stitch function.
• When performing 2-sided copying of 2-sided originals, an insert cannot be added between the front and reverse sides 

of an original page.

Back 
cover

Front cover

Originals

Inserts

Back 
cover

Originals

Front 
cover

Originals

Inserts