Seiko TM-U590/U590P User Manual
Setting Up the Printer 1-7
Connecting the Display Module
Plug the cable connector (provided with the direct connection
display module) securely into the printer’s display module
connector until it clicks.
display module) securely into the printer’s display module
connector until it clicks.
CAUTION:
Be sure not to connect this cable to the drawer kick-out
connector, which is to the left of the power supply
connector. Do not connect a telephone line to the
display connector. If you do, the printer and the
telephone line may be damaged.
connector, which is to the left of the power supply
connector. Do not connect a telephone line to the
display connector. If you do, the printer and the
telephone line may be damaged.
Notes:
To remove the cable, squeeze the connector and pull it out.
The display module can be used only for the serial interface.
Grounding the Printer
You need a ground wire to ground your printer. Make sure that the
wire is AWG 18 or equivalent.
wire is AWG 18 or equivalent.
1. Make sure that the printer is turned off.