OKI 8/8N Leaflet
IMPORTANT
OKICOLOR 8/8n Installation Checklist
Follow this checklist for trouble-free installation and operation of your OKICOLOR printer.
Have these documents and CD’s on hand as you work:
•
Set-Up Guide
•
Handy Reference
•
Online User’s Guide (located on OKICOLOR 8 CD-ROM)
•
OkiLAN 6100e+ Network Print Server User’s Guide, for OKICOLOR 8n
•
OKICOLOR 8 CD-ROM, for your operating system
•
OKINET Utilities CD-ROM, for OKICOLOR 8n
•
OkiView 32 CD-ROM; for OKICOLOR 8n
q
Check the box contents against the unpacking list.
See Set-Up Guide, page 1.
See Set-Up Guide, page 1.
q
Place the printer on a level surface and begin
installation.
See Set-Up Guide, page 1.
installation.
See Set-Up Guide, page 1.
q
Remove the packaging.
See Set-Up Guide, page 1.
See Set-Up Guide, page 1.
q
Install the toner waste box. Be sure to remove the
shipping tape and blue spacers.
See Set-Up Guide, page 2.
shipping tape and blue spacers.
See Set-Up Guide, page 2.
q
Install the oil roller.
See Set-Up Guide, page 3.
See Set-Up Guide, page 3.
q
Prepare the image drums.
See Set-Up Guide, page 4.
See Set-Up Guide, page 4.
q
Install the toner cartridges.
See Set-Up Guide, page 5.
See Set-Up Guide, page 5.
q
Load paper.
See Set-Up Guide, page 6.
See Set-Up Guide, page 6.
q
Adjust the printer’s media settings.
See the other side of this sheet.
See the other side of this sheet.
q
Connect to the computer and apply power.
See Set-Up Guide, pages 6 and 7.
See Set-Up Guide, pages 6 and 7.
q
Print the demo page.
See Set-Up Guide, page 7.
See Set-Up Guide, page 7.
q
Install the OKICOLOR 8 drivers, color utilities and
online User’s Guide. If using Windows 2000, use
the appropriate CD. Otherwise, use the other driver
CD. We recommend that you select the Typical
option.
See Set-Up Guide, page 7.
online User’s Guide. If using Windows 2000, use
the appropriate CD. Otherwise, use the other driver
CD. We recommend that you select the Typical
option.
See Set-Up Guide, page 7.
q
Perform network installation (if applicable).
q
Install the network print server (if not factory
installed).
See OkiLAN 6100e+ Network Print Server
User’s Guide, pages I-3 through I-8.
installed).
See OkiLAN 6100e+ Network Print Server
User’s Guide, pages I-3 through I-8.
q
Connect the parallel cable to the installed
network print server.
See OkiLAN 6100e+ Network Print Server
User’s Guide, page I-8.
network print server.
See OkiLAN 6100e+ Network Print Server
User’s Guide, page I-8.
q
Install the appropriate network software. Insert
the OKINET or OKIVIEW 32 CD-ROM and
follow the online instructions.
the OKINET or OKIVIEW 32 CD-ROM and
follow the online instructions.
q
Configure the network print server for the
desired network operating system.
See OkiLAN 6100e+ Network Print Server
User’s Guide for the applicable section:
Novell (see Section III)
Windows NT (see Section VIII)
Windows (see Section VIII)
Unix (see Section IV)
Macintosh (see Section VII)
desired network operating system.
See OkiLAN 6100e+ Network Print Server
User’s Guide for the applicable section:
Novell (see Section III)
Windows NT (see Section VIII)
Windows (see Section VIII)
Unix (see Section IV)
Macintosh (see Section VII)
q
Adjust the color registration.
See Set-Up Guide, page 8.
See Set-Up Guide, page 8.
q
Adjust the color balance.
See Set-Up Guide, page 9.
See Set-Up Guide, page 9.