Olivetti 16MF User Manual

When any of the following messages appear perform the procedures listed 
below.

Close ## cover.

The indicated cover is open.
Close all the covers securely.

—

Add paper in cassette.
or
Place paper in P 
cassette.

Paper has run out.
Add paper.

Add paper in cassette. 
## size (###)

Print data does not match the size or type of paper in the 
cassette.
Replace the paper.

•

To change the Paper Source, press [Paper Select] to select 
the Paper Source required and press [Enter].

•

If you press [Printer], the following messages display:

-

GO: Prints onto the currently selected paper.

-

CANCEL: Stops printing.

•

Press 

S or T to select the option required and press [Enter].

—

Set cassette.
or
Close paper cassette.

The cassette is not closed securely.
Pull out the cassette and push it back in.

—

Check paper size.

There is no paper loaded of a size that can be used in the 
currently selected mode.
Check the paper.

—

Reposition original or 
change cassette.
or
Reposition original or 
select other paper 
cassette.

The orientation of the original is different to that of the selected 
paper.
Change the orientation of the original. If you press [Start] without 
changing the orientation, copying will be performed at a 100 % 
(1:1) magnification ratio.

—

Exceed copy limit. 
Unable to copy

The number of copies made using your Management Code has 
reached the limit set and copying cannot be performed using that 
code.
Use the Department Management mode to reset the copy count.

Set toner container.

The Toner Container is not installed correctly.
Install the Toner Container correctly.

Ready to copy. 
Add toner

Toner remaining in the machine is low. It is only possible to copy 
one original at a time.
Replace the Toner Container.