Olivetti 16MF User Manual

Automatically feeds and scans 
multiple originals one by one.

Two-sided originals are 
automatically turned to enable 
both sides to be scanned.

•

Use sheet originals only

•

Paper weight:

-

One-sided originals: 45 to 160 g/m²

-

Two-sided originals: 50 to 120 g/m²

•

Paper sizes: A3 to A5R, Folio, 11 × 17" (Ledger) to 5

1/2

× 8

1/2

" 

(Statement).

•

Maximum capacity: 50 sheets (50 to 80 g/m²) at one time. 30 sheets 
for Auto Selection mode.

Do not use the following originals in the Document Processor. In addition, 
originals with punched holes or perforations should be loaded with the hole 
punched or perforated edge facing away from the direction of insertion into 
the Document Processor.

•

OHP and other transparency films.

•

Soft originals, for example carbon or vinyl paper, or other originals that 
are curled, wrinkled or creased.

•

Irregularly shaped originals, wet originals, or originals that contain 
adhesive tape or glue.

•

Originals bound with clips or staples. If using these originals, to avoid 
jams remove the clips or staples and straighten any curls, wrinkles or 
creases, before loading in the Document Processor.

•

Originals with cut-out sections or that have a slippery surface on either 
side.

•

Originals on which any correction fluid is still wet.

•

Originals with strong folds. If using these originals, smooth out the 
folds before loading in the Document Processor. Failure to do so may 
result in the originals becoming jammed.

•

Curled originals. If using these originals, smooth out the curled 
portions before loading them in the Document Processor.