NEC 1800 User Manual
Use this instruction sheet for installing the optional NEC SuperScript 1800 500-sheet 2nd Cassette (Tray 3). The cassette can
hold 500 sheets of medium weight paper or 40 envelopes. Do not load transparencies or label sheets in the 500-sheet 2nd
Cassette. For a complete list of usable media sizes see Appendix B, in the
hold 500 sheets of medium weight paper or 40 envelopes. Do not load transparencies or label sheets in the 500-sheet 2nd
Cassette. For a complete list of usable media sizes see Appendix B, in the
SuperScript 1800 User’s Guide
.
Installing the 500-sheet 2nd Cassette
Loading Paper in the 500-sheet 2nd Cassette
1.
Turn off the printer.
2.
Remove all cables
(A)
.
3.
Make sure there is plenty of room around and
above the printer to work. Remove the 500-sheet
2nd Cassette from its packaging.
above the printer to work. Remove the 500-sheet
2nd Cassette from its packaging.
4.
Put the 500-sheet 2nd Cassette unit next to the
printer.
printer.
5.
Carefully place the printer on the 500-sheet 2nd
Cassette unit as shown
Cassette unit as shown
(B)
.
6.
Reconnect all cables.
7.
Turn on the printer
(C)
.
8.
Make sure READY appears on the Operator Panel display.
9.
If you are using the Windows PostScript printer driver,
open the Properties window, view the Device Options
(Windows 95/98) or Device Settings (Windows NT 4.),
and make sure that the optional cassette (Tray 3) is
selected.
open the Properties window, view the Device Options
(Windows 95/98) or Device Settings (Windows NT 4.),
and make sure that the optional cassette (Tray 3) is
selected.
10. Confirm the installation by printing a printer
configuration page from the Operator Panel as described
in Chapter 5 of the
in Chapter 5 of the
SuperScript 1800 User’s Guide
.
1.
Remove the tray from the 2nd Cassette unit
(A)
.
Take out the styrofoam packing.
2.
Make sure the lever on the left-front side of the
cassette tray is positioned into the hole at the end of
the slot
cassette tray is positioned into the hole at the end of
the slot
(B)
.
3.
Squeeze and adjust the Back Paper Guide to the
desired paper length
desired paper length
(C)
.
4.
Make sure the Envelope Guide is adjusted to its back
position
position
(D)
.
5.
Lift the tab on the top of Side Guide 1 and slide it to the
paper size indicated on the tray bottom
paper size indicated on the tray bottom
(E)
.
6.
Place the paper into the tray
print side down
.
7.
Move Side Guide 2 to fit lightly against the paper
stack
stack
(F)
.
8.
Reinsert the tray into the 500-sheet 2nd Cassette unit.
To load envelopes please see the User’s Guide.
A
B
C
note:
The 500-sheet 2nd Cassette is
referred to as Tray 3 in the printer driver and
on the Operator Panel.
on the Operator Panel.
Envelope Guide
B
A
E
D
C
F
lever
NEC
S
UPER
S
CRIPT
1800
O
PTIONAL
500-
SHEET
2
ND
C
ASSETTE
— I
NSTRUCTIONS
P
ART
N
O
. 808-878305-011A