Netgear FWG114P v2 User Manual

8-38

Virtual Private Networking

–

Select Enable Authentication in the ESP Configuration Enable Authentication check 
box.

 

Note: Do not confuse this with the Authentication Protocol (AH) option. Using the AH 
option will prevent clients behind a home NAT router from connecting.

–

From the ESP Configuration Authentication Algorithm drop-down box, select SHA-1. 
This will also be entered in the VPN Client Security Policy Key Exchange (Phase 2) Hash 
Alg field, as seen in 

.

–

Select the NETBIOS Enable check box to enable networking features like Windows 
Network Neighborhood.

Click Apply to save your changes. You will be taken back to the VPN Policies Menu page.

4.

When the screen returns to the VPN Policies, make sure the Enable check box is selected. 
Click Apply to save your changes.

This procedure describes linking a remote PC and a LAN. The LAN will connect to the Internet 
using an FWG114P v2 with a static IP address. The PC can be directly connected to the Internet 
through dialup, cable or DSL modem, or other means, and we will assume it has a dynamically 
assigned IP address. 

The Netgear ProSafe VPN Client has the ability to “Import” a predefined 

configuration profile. The FWG114P 

V

2.SPD file on the ProSafe Wireless 802.11g  

Firewall/Print Server Model FWG114P v2 Resource CD for the ProSafe Wireless 
802.11g  Firewall/Print Server Model FWG114P (SW-10023-03) includes all the 
settings identified in this procedure.

 

 
Whenever importing policy settings, you should first export any existing settings you 
may have configured to prevent the new imported settings from replacing an existing 
working configuration.

 

 
To import this policy, use the Security Policy Editor File menu to select Import Policy, 
and select the FWG114P v2.SPD file at D:\Software\Policies where D is the drive letter 
of your CD-ROM drive.