Netgear FWG114P v2 User Manual

4-10

Wireless Configuration

4.

Click Add to open the Wireless Card Access Setup menu. You can select a device from the list 
of available wireless cards the FWG114P v2 has discovered in your area, or you can manually 
enter the MAC address and Device Name (usually the NetBIOS name).

5.

Click Add to add this device to your MAC access control list.

6.

Be sure to click Apply to save your trusted wireless PCs list settings. Now, only devices on 
this list will be allowed to wirelessly connect to the FWG114P v2.

To remove a MAC address from the table, click to select it, then click the Delete button.

To configure WEP data encryption, follow these steps:

1.

Log in at the default LAN address of 

 with the default user name of admin 

and default password of password, or using whatever LAN address and password you set up.

When configuring the FWG114P v2 from a wireless computer whose MAC 

address is not in the access control list, if you select Turn Access Control On, you will 
lose your wireless connection when you click Apply. You must then access the wireless 
firewall/print server from a wired computer or from a wireless computer which is on the 
access control list to make any further changes.

When changing the wireless settings from a wireless computer, you will lose your 

wireless connection when you click Apply. You must then either configure your wireless 
adapter to match the new wireless settings or access the wireless firewall/print server 
from a wired computer to make any further changes.