Netgear FWG114P v2 User Manual

4-16

Wireless Configuration

•

Secondary Radius Server Name/IP Address: This field is optional. If you have a 
Secondary Radius Server on your LAN, enter its name or IP address here. 

•

Radius Port: Enter the port number used for connecting to the Radius Server. 

•

Shared Key: Enter the desired value for the Shared Key. This must match the value used 
on the Radius server.

•

Radius Accounting: Enable Radius Accounting 

Enable this if you want to use the Radius Accounting system. If enabled, the following 
fields must be correct: 

•

Radius Accounting Port: Enter the port number used for Accounting data on the Radius 
Server. 

•

Update Report: Enable this if you wish to have this AP send Accounting update 
messages to the Radius accounting server periodically. 

If enabled, enter the desired Update Report interval in the field provided. 

5.

Click Apply to save your settings.

Note: Not all wireless adapters support WPA and WPA2. Furthermore, client software is required 
on the client. Windows XP and Windows 2000 with Service Pack 3 do include the client software 
that supports WPA and WPA2. Nevertheless, the wireless adapter hardware and driver must also 
support WPA and WPA2. Consult the product document for your wireless adapter and WPA and 
WPA2 client software for instructions on configuring WPA and WPA2 settings.

To configure WPA and WPA2 with Radius, follow these steps:

1.

Log in at the default LAN address of 

 with the default user name of admin 

and default password of password, or using whatever LAN address and password you have 
set up.