JVC CX-7000 Series User Manual
5
Remove the jammed card in the card turn over unit from the card
load slot
load slot
.
6
Install the cleaning unit
7
Attach the jog dial to the card turn over unit shaft, and set the card
turn over unit to “Home Pos.”
turn over unit to “Home Pos.”
v
“Home Pos.” is the position where the slit on the jog dial points to
the right and the card turn over unit is horizontal.
the right and the card turn over unit is horizontal.
.
.
8
Restore the jog dial to its original position
9
Install the card load slot cover and card hopper, and close the
printer door
printer door
10
Turn on the power
Cautions:
v
When a Jam(TurnOver) error occurs, the [Jam(TurnOver)]
message will not disappear after removing the jammed card until
the card turn over unit is set to “Home Pos.”.
message will not disappear after removing the jammed card until
the card turn over unit is set to “Home Pos.”.
v
If the printer door is opened when a Jam(TurnOver) error occurs, a
[Please Adjust Turn Unit Pos!] message will be displayed. Remove
the jammed card, and set the card turn over unit to “Home Pos.”.
[Please Adjust Turn Unit Pos!] message will be displayed. Remove
the jammed card, and set the card turn over unit to “Home Pos.”.
m
If the card cannot be removed
A
A
Install the cleaning unit
B
Attach the jog dial to the cleaning roller shaft and card turn
over unit shaft
.
.
C
Set the card turn over unit to “Home Pos.”
v
“Home Pos.” is the position where the slit on the jog dial
points to the right and the card turn over unit is horizontal.
points to the right and the card turn over unit is horizontal.
.
v
If the card protrudes from the card turn over unit, turn the
cleaning roller shaft to move the card into the unit.
cleaning roller shaft to move the card into the unit.
Troubleshooting
48